3D MODEL DESCRIPTION
Bubble up your dock with this sweet cover! Keeps your controllers in line, while making your setup pop.
Compatible with Nintendo Switch and Nintendo Switch OLED.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor (Double controller) - 10 Hour 20 Minutes* (may vary according to you printer model)
Monocolor (Single controller) - 9 Hour 56 Minutes* (may vary according to you printer model)
- Approximately Height: 10 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
