Cheese Wheel

3D MODEL DESCRIPTION

This one is all about figuring out how the wheel comes apart, and getting it back together in the right order. Comes with a storage cloche so it stays tidy between rounds.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 07 Hours 11 Minutes*  (may vary according to your printer model)
                                Multiparts - 08 Hours 40 Minutes*  (may vary according to your printer model)
                                Multicolor - 14 Hours 31 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
• Approximately Height: 10cm

*Note: Printing time based on a Bambu P1s printer, according to our tests. And considering the stand.

 ATTENTION: “Multipart” files requires super glue.

3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 2.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: Brim, only in parts with low adhesion.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!