3D MODEL DESCRIPTION
This is the only puzzle you’re allowed to cheese it. If you find a way to, of course.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 01 Day 06 Hours 01 Minute (will vary accord to you printer model)
- Approximately Height: 7,5 cm
- You will need 6 M3-20mm Screw - Amazon / Aliexpress
- Assemble 2X2
🌎 https://youtu.be/kP7GfDXxqWQ - Assemble 3X3
🌎 https://youtu.be/SpeGKZztRCw
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!