3D MODEL DESCRIPTION
Is this a bouncing cockatoo or is she just happy to see me?
The cockatoo is super simple to print, you’ll need no supports and minimal assembly. The feathers on top are articulated, and so are the legs, so you’ll have the bouncing movement.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 15 Hours 30 Minutes
- Approximately Height: 22,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!