3D MODEL DESCRIPTION
You always said you’d shoot for the moon. Now you're holding it.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 42 Minutes* (may vary according to you printer model)
Multicolor - 13 Hours 44 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 7 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests. Time considering only the "useful model", without the head.
Note: This model has a built-in magnet slot, and to insert it, a print pause must be scheduled at the corresponding layer.
Important: If your nozzle is metal, it may attract the magnet. A drop of super glue might be necessary.
Will you need: 4 Magnets size 5x2mm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
