3D MODEL DESCRIPTION
A striking architectural masterpiece located in Brasília, Federal District. This miniature captures one of Brazil's most recognizable religious landmarks and a symbol of the nation's modernist architecture.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - Small - 05 Hours, 32 Minutes* (may vary according to your printer model)
Monocolor - Light - 12 Hours, 59 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: Small - 12 cm / Light - 15 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
Use a power cord and plug of your choice, a light bulb, and a light socket at the links below.
You Will Need: Socket G9 - Amazon - AliExpress - Mercado Livre
Led G9 - Amazon - AliExpress - Mercado Livre
Bambu LED Kit - Bambu Store - Amazon - Aliexpress
Candle LED - Amazon - Mercado Livre - Aliexpress (Remove the top part of the tea light use only the base that contains the LED and batteries.)
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 04 walls, except in “Cross”,“Small Decor”,“Base” and “Led Holder” files. Use 02 walls only in “Cross”,“Small Decor”,“Base” and “Led Holder” files.
- Recommended Infill (%): 75% (Lighting), except in “Cross”,“Small Decor”,“Base” and “Led Holder” files. Use 10% (Gyroid) only in “Cross”,“Small Decor”,“Base” and “Led Holder” files.
- Needs Support: Yes, (Grid Manual) except in “Cross”,“Base” and “Led Holder” files.
- Build Plate Adhesion: Yes, (Painted Brim) except in “Cross”,“Base” and “Led Holder” files.
- Others: For a better finish, use a more precise profile optimized for the smaller perimeters of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!