3D MODEL DESCRIPTION
A calm little lake piece where your MiniMe can relax, fish, or just enjoy the view.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 55 Minutes* (may vary according to you printer model)
Multipart - 53 Minutes* (may vary according to you printer model)
Multicolor - 03 Hours, 29 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 06 colors) - Approximately Measurements: 06 x 06 x 02 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue, pay attention to the settings indicated to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Concentric) for finishing the top layers, if you prefer.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Brim) only on parts with less adhesion to the table.
- Others: If you prefer, you can use a more optimized and economical profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
