3D MODEL DESCRIPTION
This frog has a surprise for you! Maybe feeling butterflies in your stomach isn't that good after all. For better adhesion to the bed, use the “brim” option, alongside supports to print the mouth. The butterflies are a separate print, but don’t worry, they’ll be ready in a flap of wings.
To assemble the butterfly:
Place an elastic on the hook of the Butterflies in Frog’s Stomach_Butterfly_Top; You can find HERE
Thread the elastic through the hole of Butterflies in Frog’s Stomach_Butterfly_Middle, from top to bottom;
Place the elastic on the hook of the Butterflies in Frog’s Stomach_Butterfly_Bottom;
Join all the three parts and twist the wings several times, and let it go to see it fly away.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 02 Days 13 Hours 47 Minutes
- Approximately height: 16 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!