3D MODEL DESCRIPTION
Press clay through the hen and watch an egg form around the chick inside its nest. A toy that makes the magic of hatching feel real and hands-on.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hours 03 Minutes* (may vary according to your printer model)
Multiparts - 01 Hours 31 Minutes* (may vary according to your printer model)
Multicolor - 08 Hours 15 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Barn Multiparts - 09 Hours 38 Minutes* (may vary according to your printer model)
- Approximately Height: Barn 11 cm - Hen 4 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
ATTENTION: We do not recommend using EVA Clay Type.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!