3D MODEL DESCRIPTION
Sets the mood like a real broadcast booth. Whether it lights up a desk or a shelf, it tells everyone the session is live.
- This STL file is recommended for FDM Printers!
- 3D Printing Time :Mic Structure - 05 Hours 20 Minutes* (may vary according to your printer model) Monocolor - 01 Hours 21 Minutes* (may vary according to your printer model)
Multiparts - 01 Hours 23 Minutes* (may vary according to your printer model)
Multicolor - 01 Hours 42 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 10 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Will Need: Socket G9 - Amazon - AliExpress - Mercado Livre
Led G9 - Amazon - AliExpress - Mercado Livre
Bambu LED Kit - Bambu Store - Amazon - Aliexpress
Candle LED - Amazon - Mercado Livre - Aliexpress (Remove the top part of the tea light use only the base that contains the LED and batteries.)
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. Outer brim only.
- Others: In the "Filter" part, you need to configure its center. In - Objects - click on "filter" and select "center", modify the following settings; Infil: 25% - Top layer of the shell: 0 - Lower layers: 0
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!