3D MODEL DESCRIPTION
It’s not just a lamp, it’s a lunar cycle on your nightstand. Watch the moon shift through its phases with an astronaut buddy on top.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 02 Hours 08 Minutes* (may vary according to you printer model)
- Multicolor - 01 Day, 03 Hours 59 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
- Approximately Height: 25 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
What you’ll need:
LED Lamp G9 Amazon Aliexpress Mercado Livre
Socket (for G9 lamp) Amazon Aliexpress Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (tree), only in "Moon front" and “Moon back” files.
- Build Plate Adhesion: Yes, outer and inner in “Moon front”, “Moon back” and “Moon frame” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!