3D MODEL DESCRIPTION
Because even speed demons need to keep track of time. A brake disc clock that shows time in style.
- This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 01 Day, 10 Hours, 99 Minutes (will vary accord to you printer model) - Approximate Measurements: 22 x 20 x 05 cm
You'll need:
Clock Mechanism (Maximum dimension 56mm x 56mm x 16mm) Amazon - AliExpress
*Attention in this Assembly: Do not change the recommended profiles in the "PDF" if you use "Silk" filament.
Note: If the clock mechanism comes with a metal bracket used to mount the clock on the wall, do not use it.
For the second hand, use the model that comes with the clock engine.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Grid)
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
