3D MODEL DESCRIPTION
A cute dinosaur wearing a skull crown that slides right over its head. Equal parts adorable and eerie, it's the kind of keychain people actually ask about.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 42 Minutes* (may vary according to your printer model)
Multicolor - 06 Hours 58 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 2 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests. Time considering only one version, between the two available (keychain and figurine)
You will need;
Split Key Ring with Chain: Amazon - Aliexpress - Mercado Livre
Ring Conector 12 mm: Amazon - Aliexpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim, only in the “Skull Mask” file.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
