3D MODEL DESCRIPTION
A hulking troll built like a boss encounter, club raised over bones and rubble. The kind of miniature that makes players pause before they roll initiative.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 80mm - 05 Hours, 04 Minutes* (may vary according to your printer model)
Multicolor - 80mm - 08 Hours, 55 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Monocolor - 120mm - 10 Hours, 35 Minutes* (may vary according to your printer model)
Multicolor - 120mm - 16 Hours, 27 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 10 cm and 16 cm (with a base.)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files not requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 1% (Concentric)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: When working with a miniature, use a more precise profile of your choice at a reduced speed for small surfaces.
3D FILES INCLUDED
- Pre-Supported: Standard STL file version includes all supports (pre-supported).
- Solid Model: You must hollow the 3D print model yourself and add the supports as you wish.
- Hollow Model: You must add your own supports.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!