3D MODEL DESCRIPTION
A bone-styled shoulder piece that matches the Bonebreaker helmet. Strong lines and a rugged feel
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Small - 06 Hours, 58 Minutes* (may vary according to you printer model)
Monocolor Medium -10 Hours, 10 Minutes* (may vary according to you printer model)
Monocolor Large - 10 Hours, 55 Minutes* (may vary according to you printer model)
Multipart Small - 06 Hours, 44 Minutes* (may vary according to you printer model)
Multipart Medium - 09 Hours, 55 Minutes* (may vary according to you printer model)
Multipart Large - 10 Hours, 43 Minutes* (may vary according to you printer model)
Multicolor Small - 01 Day, 01 Hours, 12 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multicolor Medium - 01 Day, 09 Hours, 32 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multicolor Large - 01 Day, 11 Hour, 30 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Measurements Small: 22 x 10 x 16 cm (Assembled Files)
- Approximately Measurements Medium: 26 x 12 x 20 cm (Assembled Files)
- Approximately Measurements Large: 28 x 14 x 21 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
ATTENTION:You will need a 03 cm wide strap/belt to attach to your body. The length and style are up to you.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid).
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim Type)
- Others: If you prefer, you can use a more optimized and economical profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!