3D MODEL DESCRIPTION
When the water is just right, a small flower blooms on the cactus. When it's time to refill, the flower disappears. It's a planter that grows its own reminder.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multipart - 15 Hours, 02 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 17 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “MULTIPART” files do not requires glue.
You Will Need: Water Wick 03/04 mm - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes, (Tree Type) only in “Flower” file.
- Build Plate Adhesion: Yes, (Painted Brim) only in “Rod” file.
- Others: You can also use (Fuzzy Skin) in “Base” files if you prefer.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!