3D MODEL DESCRIPTION
Flowing fins wrap around a glowing sphere, creating a light piece inspired by fluid motion and grace.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - BIG 10 Hours 16 Minutes* (may vary according to your printer model)
- SMALL 07 Hours 10 Minutes* (may vary according to your printer model)
- Approximately Height: Big 18cm, Small 15cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light. Always use LED light sources to avoid damaging your light fixture.
On this project you can choose between 3 types of light source:
G9 (you’ll need to print the g9 adapter) - Socket/Conector G9 - Amazon - AliExpress - Mercado Livre
LED Lamp G9 - Amazon - AliExpress - Mercado Livre
Tea Light Candle - Amazon Mercado Livre Aliexpress (Remove the top part of the tea light use only the base that contains the LED and batteries.)
Bambu LED Kit: Bambu Store Amazon Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 5.
- Recommended Infill (%): 15% (Gyroid)
- Wall Generator: Arachne
- Needs Support: Yes (tree supports).
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
