3D MODEL DESCRIPTION
Stag beetles are always ready to fight, but this one rather chill hanging on your wall.
The Beetles on the Wall collection is great for you to display your love for them. Be aware of the first layer so that the nozzle is not hitting their tiny little paws, and let it be! Oh, you meant the other Beatles, right?
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Beetle - 05 Hours 04 Minutes
Wall Stand - 05 Hours 48 Minutes - Approximately dimensions: Beetle - 11 cm X 08 cm
Wall Stand - 15 cm X 10 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 60mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm (Beetle) | 0.20 mm (Stand)
- Recommended Layer Height: 0.12 mm (Beetle) | 0.20 mm (Stand)
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!