3D MODEL DESCRIPTION
Gift Card Holder. A gingerbread house that hides a gift card in the back and reveals a bear placing a star on top of a tree when you pull it out. Giving a gift card just got a lot more fun to unwrap.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 03 Hours 11 Minutes* - 71 g of filament (may vary according to your printer model)
- Multicolor - 21 Hours 53 Minutes* - 316 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 02 colors)
- Multipart - 04 Hours 16 Minutes* - 85 g of filament (may vary according to your printer model)
- Approximately Height: 14 x 13,5 x 2 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
ATTENTION: These files require super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 50 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (tree (auto)).
- Build Plate Adhesion: Yes (mouse ear brim).
- Others: Automatic Slim Tree Stand. "Rat-ear" twill. Reduce print speed for tall parts.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
