3D MODEL DESCRIPTION
Not royalty. Survival. A bone-forged creature crown for those who don’t ask permission to rule the wasteland.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Large - 06 Hours, 24 Minutes* (may vary according to your printer model)
Multiparts Large - 05 Hours, 47 Minutes* (may vary according to your printer model)
Multicolor Large - 24 Hours, 36 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 18 x 19 x 18 cm (Large Type)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. (Tree Type)
- Build Plate Adhesion: Yes, only on parts with low adhesion on the print bed.
- Others: You will be able to use a more optimized profile.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!