3D MODEL DESCRIPTION
It may be a non-unsportsmanlike foul, but sure it’s thrilling to watch. Luckily, you’ll have no fouls counted if the player is 3D printed – and the backboard as well! This model is already pre supported for you and specially cut to ease the assembly process. For even more highlighted details, lower the layer height.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 02 Days 13 Hours 34 Minutes
- Approximately Height: 30 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!