3D MODEL DESCRIPTION
The best dragon is the one you can take anywhere! This is one of many in the Ultimate Dragon Head Collection. If you fancied this one, wait until you see the others.
- This STL file is recommended for FDM Printers and Resin Printers!
- 3D Printing Time Based on Ender 3: 4 Hours 55 Minutes (will vary accord to you printer model)
- Approximately Height: 5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!