3D MODEL DESCRIPTION
A cozy little habitat designed to display your axolotls together. It creates the perfect home for the collection, keeping them organized while showing off all their different moods.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 18 Minutes* (may vary according to your printer model)
Multiparts - 04 Hours 26 Minutes* (may vary according to your printer model)
Multicolor - 01 Day 54 Hours* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 6,5 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
