3D MODEL DESCRIPTION
Looking for a safer way of practicing axe throwing inside the house? This little viking will help you throw axes around without any collateral damage! That way, everybody gets happy and no police get involved this time.
Get your axe throwing viking ready with these instructions:
1. Attach the central socket of the Lever to the center of the trunk.
2. Attach the circular part of the Clip to the Lever.
3. Position the Viking_Body with the legs found at the base.
4. Attach the C-shaped part of the Clip to the back of the Viking_Body.
5. Attach the Cloak to the Clip attached to the back of the Viking_Body.
6. Position the Axe in the hands of the Viking_Body.
7. Now, firmly press the Lever to make your Viking throw the axe!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 13 Hours 50 Minutes
- Approximately Dimensions: 16 cm X 07 cm X 13 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!