Axe of the Doomed

3D MODEL DESCRIPTION 

Hatred is a blazing fire, but can you stand the heat? This axe will grant a +3d6 fire damage once per turn to a designated target, but you’ll receive 2d4 fire damage per turn for as long as you’re holding the weapon. 

• This STL file is recommended for FDM Printers!
• 3D Printing Time Based on Ender 3: 03 Days 10 Hours 24 Minutes (will vary accord to you printer model)
• Approximately Height: 60 cm 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.20 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!