3D MODEL DESCRIPTION
Aura envelopes its surroundings in a warm, atmospheric light. Perfect for sideboards and tabletops, it creates a gentle ambiance that softens and enriches the space.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 20 Hours 22 Minutes* (may vary according to you printer model)
- Approximately Height: 40 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate them with electrical tape.
Important: Always use LED light sources to avoid damaging your light fixture.
Links: E27 Socket: Mercado Livre Amazon Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Tree (Only for Light End Module).
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
