3D MODEL DESCRIPTION &nbsp;Our articulated tarantula has plenty of movement to go up and down the water spout!&nbsp;Its junctions were reinforced to create an even more resistant print. And if she’s being a bit too lazy, just press her back down and she’ll be right into ready position!&nbsp;&nbsp;<ul><li>This STL file is recommended for FDM Printers!</li><li>3D Printing Time: 1 Day 20 Hours 54 Minutes&nbsp;</li><li>Approximately length:&nbsp;16 cm &nbsp;</li></ul>3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)&nbsp;<ul><li>Line Width/ Nozzle:&nbsp;0.4 mm</li><li>First Layer Line Width:&nbsp;0.48 mm / 120%</li><li>Average Speed:&nbsp;15 mm/s (First Layer) / 45 mm/s (All the other layers)</li><li>Recommended Initial Layer Height:&nbsp; 0.12 mm</li><li>Recommended Layer Height:&nbsp; 0.2 mm</li><li>Recommended Perimeters/ Walls:&nbsp;3.</li><li>Recommended Infill (%):&nbsp;10% (Gyroid)</li><li>Needs Support:&nbsp;No.</li><li>Build Plate Adhesion:&nbsp;Skirt.</li></ul>&nbsp;The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.&nbsp;&nbsp;Happy Printing!

Articulated Tarantula