3D MODEL DESCRIPTION&nbsp;The Rooster is quite a domestic bird, but that doesn’t mean it’s not admirable.&nbsp;Our Rooster is a fairly simple print that is print-in-place, needs no supports and is articulated. You’ll also have a multicolor option for this one. &nbsp;<ul><li>This STL file is recommended for FDM Printers!</li><li>3D Printing Time: 13 Hours 25 Minutes</li><li>Approximately Height: 16 cm</li></ul>&nbsp;3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)&nbsp;<ul><li>Line Width/ Nozzle:&nbsp;0.4 mm</li><li>Average Speed:&nbsp;20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)</li><li>Recommended Initial Layer Height:&nbsp;&nbsp;0.16 mm</li><li>Recommended Layer Height:&nbsp;&nbsp;0.16 mm</li><li>Recommended Perimeters/ Walls: 3.</li><li>Recommended Infill (%):&nbsp;10% (Gyroid)</li><li>Needs Support: No.</li><li>Build Plate Adhesion:&nbsp;Skirt.</li></ul>&nbsp;The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. &nbsp;Happy Printing!

Articulated Rooster