3D MODEL DESCRIPTION
This Nothosaurus model follows a new pattern of connections that improves articulations and mobility by enhancing the strength on each ring. Remember to stabilize your printer for the best contact adherence, and happy printing.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 09 Hours 09 Minutes
- Approximately length: 36,4 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 15 mm/s (First Layer) / 45 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!