3D MODEL DESCRIPTION &nbsp;Look at this little guy, living its best life. This lizard has not one but two types of articulation, what an expert of moving around! Easy to print, even easier to keep.&nbsp;<ul><li>This STL file is recommended for FDM Printers!</li><li>3D Printing Time: 12 Hours 18 Minutes</li><li>Approximately Length:&nbsp;20 cm &nbsp;</li></ul>&nbsp;&nbsp;&nbsp;3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)&nbsp;<ul><li>Line Width/ Nozzle:&nbsp;0.4 mm</li><li>First Layer Line Width: 0.48 mm / 120%</li><li>Average Speed:&nbsp;20mm/s (First Layer) / 50mm/s (All the other layers)</li><li>Recommended Initial Layer Height:&nbsp; 0.16 mm</li><li>Recommended Layer Height:&nbsp; 0.16 mm</li><li>Recommended Perimeters/ Walls:&nbsp;3.</li><li>Recommended Infill (%):&nbsp;10% (Gyroid)</li><li>Needs Support:&nbsp;No.</li><li>Build Plate Adhesion:&nbsp;Skirt.</li></ul>&nbsp;The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. &nbsp;Happy Printing! &nbsp;

Articulated Lizard