3D MODEL DESCRIPTION
Adorable and simple to print, this articulated kitten is the best of both worlds. If you like to experiment, try using fuzzy skin on the fur regions to make the fluffy kitten extra fluffy! How adorable.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 7 Hours and 55 Minutes
- Approximately Length : 11cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!