3D MODEL DESCRIPTION
Don’t mess with this guy, its articulations are so real you might actually get stung! This articulated scorpion is ready to defend itself, with its highly mobile articulations all the way from its tail to its pincers that mimic the real animal. All the supports you’ll need are already in the model so no stress, just enjoy the ride.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 16 Hours 56 Minutes
- Approximately length: 24 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 15 mm/s (First Layer) / 45 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!