3D MODEL DESCRIPTION
Armored, armed, and built for conflict. This figure embodies the god of war in full battle glory, a must-have for any mythology or fantasy collection.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multicolor - 01 Day, 10 Hours, 26 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Height: 25 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, (Auto Grid) if necessary, use (Painted Support) for better quality.
- Build Plate Adhesion: Yes, (Brim) only on files that don't adhere well to the printing bed.
- Others: Be sure your support profile is optimized for better quality.
3D FILES INCLUDED - SLA
- Pre-Supported: Standard STL file version includes all supports (pre-supported).
- Solid Model: You must hollow the 3D print model yourself and add the supports as you wish.
- Hollow Model: You must add your own supports.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!