3D MODEL DESCRIPTION
A gem pulsing with magic, or at least it looks like it. Print your own or add a real one for that enchanted glow.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 21 Minutes* (may vary according to you printer model)
- Approximately Height: 5 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
For the gem, you can use a 14mm square gem available on- Aliexpress | Amazon | Shopee . Alternatively, you can print your own gem using the provided files.
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!