3D MODEL DESCRIPTION
Probably knows what they’re doing. Probably. Either way, something magical is about to happen.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hour, 26 Minutes* (may vary according to your printer model)
Multiparts - 01 Hour, 03 Minutes* (may vary according to your printer model)
Multicolor - 19 Hours 35 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 06 colors) - Approximately Height: 5,5 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre
Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Grid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim Type) Only small parts and parts with poor adhesion to the table.
- Others: For a better finish on smaller multi-part parts, use a layer height of 0.08. Use top surface pattern concentric.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!