Meet the star of the show (don’t let him know we called him that). He might look angry, but he’s just… okay fine, he is angry. We just can’t help giving him the spotlight!
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 04 Hours, 34 Minutes* (may vary according to you printer model)
Multipart - 04 Hours, 26 Minutes* (may vary according to you printer model)
Multicolor - 07 Hours, 47 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Measurements: 07 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue, pay attention to the settings indicated to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Others: We use (Archimedean Chords) for finishing the top layers, if you prefer.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroidy)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim) only in the smallest parts with low bed adhesion.
- Others: For small parts, use a 0.08 mm profile for better finishing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!