3D MODEL DESCRIPTION
If the production feels endless, that’s because it is.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 04 Days 08 Hours 43 Minutes (will vary accord to you printer model)
- Approximately Height: 26 cm
In order to assembly this print you will need the materials below:
LED Lights
On-Off Switch
Solder
Soldering Iron
Electric Wire
Electrical Plug (2.1mm DC Jack 12V)
Power Supply (12V 1A)
Electrical Tape
15X20 cm Mirror
15x20 cm Glass Covered With Reflective Film
3D TECHNICAL OVERVIEW
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!