3D MODEL DESCRIPTION
Can you believe this highly detailed dice tower is printed all in one piece, no assembly required, no supports and it’s super easy to print? I know it sounds too good to be true, but it is!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 02 Days 15 Hours 34 Minutes
- Approximately Height : 18,3 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!