3D MODEL DESCRIPTION (for FDM models)
Larger ruined buildings and structures, alongside sarcophagi, barrels, and crates, to populate abandoned sites and lost settlements.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Day, 08 Hours, 13 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
- Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: If you prefer, you can use a more optimized and economical profile of your choice.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Painted Brim) only on parts with less adhesion to the table.
- Others:
3D PRINT FILE SETTINGS (for SLA models)
- Pre-Supported: Standard STL file version includes all supports (pre-supported).
- Solid Model: You must hollow the 3D Print model yourself and add the supports as you wish.
- Hollow Model: You must add your own supports.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!