3D MODEL DESCRIPTION
A printable katana with a textured wood-style finish and matching scabbard. It looks aged, intentional and ready for display or cosplay.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor - 18 Hours, 10 Minutes* (may vary according to your printer model)
Multiparts - 18 Hours, 27 Minutes* (may vary according to your printer model)
Multicolor - 02 Days, 22 Hours, 52 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 26 x 04 x 03 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Brim Type) only for parts with poor adhesion to the build plate or tall parts that are at risk of falling.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!