3D MODEL DESCRIPTION
Ready for anything. The deluxe setup for full relaxation, drinks, remotes, your phone and zero need to get up.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 20 Hours 57 Minutes* (may vary according to you printer model)
- Approximately Dimensions: 47 x 40 x 4cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
*Attention: This model has pre-supports that should be removed after printing is complete.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, if you choose the version without pre-support.
- Build Plate Adhesion: No.
- Others: Tip: you can change the top surface pattern to create different finishes and personalize your piece.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!