3D MODEL DESCRIPTION
Encircled by rising tentacles, the glowing sphere evokes a quiet, mysterious presence from the deep.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - BIG 12 Hours 04 Minutes* (may vary according to your printer model)
- SMALL 07 Hours 24 Minutes* (may vary according to your printer model)
Approximately Height: Big 16cm, Small 13cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light. Always use LED light sources to avoid damaging your light fixture.
On this project you can choose between 3 types of light source:
G9 (you’ll need to print the G9 adapter) - Socket/Conector G9 - Amazon - AliExpress - Mercado Livre
LED Lamp G9 - Amazon - AliExpress - Mercado Livre
Tea Light Candle - Amazon - Mercado Livre - Aliexpress (Remove the top part of the tea light use only the base that contains the LED and batteries.)
Bambu LED Kit: Bambu Store - Amazon - Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 5.
- Recommended Infill (%): 15% (Gyroid)
- Wall Generator: Arachne
- Needs Support: Yes (tree).
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
