3D MODEL DESCRIPTION
An extraordinary city, Oslo is famous for its modern architecture. You might leave with an ancestral viking knowledge and a Nobel Peace Prize award, who knows.
This model uses data from OpenStreetMap, which comes under the Open Database License. This means that whenever you display or sell your prints, you have the obligation of displaying that it comes from OpenStreetMap.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: A 18 Hours, 20 Minutes, B 19 Hours, 43 Minutes, C 15 Hours, 21 Minutes, D 9 Hours, 31 Minutes (will vary accord to you printer model)
- Approximately Height: A 1,4 cm, B 2,1 cm, C 1,4 cm, D 1,1 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!