3D MODEL DESCRIPTION
With places like South Beach, who wouldn’ want to visit Miami at least once? If you say you don’t, you are either lying to yourself, or you already live there!
This model uses data from OpenStreetMap, which comes under the Open Database License. This means that whenever you display or sell your prints, you have the obligation of displaying that it comes from OpenStreetMap.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 04 Days 09 Hours 08 Minutes - Big (will vary accord to you printer model)
02 Days 23 Hours 29 Minutes- Small (will vary accord to you printer model) - Approximately Dimensions: 15 cm - Big
9,5 cm - Small
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Top Layers: 7
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!