3D MODEL DESCRIPTION
Poland’s former capital is filled with Medieval architecture and beautiful castles so you can feel like you’re in a fairy tale.
This model uses data from OpenStreetMap, which comes under the Open Database License. This means that whenever you display or sell your prints, you have the obligation of displaying that it comes from OpenStreetMap.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 06 Days 6 Hours 57 Minutes - Big (will vary accord to you printer model)
03 Days 01 Hours 32 Minutes- Small (will vary accord to you printer model) - Approximately Dimensions: 15 cm - Big
9,5 cm - Small
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Top Layers: 7
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!